Physical Interfaces

• 8 RJ45 Ethernet Ports – 10/100/1000Mbps
• 2 SFP Ports – 1000Mbps
• Console Port (RJ45 physical, RS-232 electrical)
• Factory Reset Button

PoE Specification

• 8 Power over Ethernet LAN ports - PoE PSE Mode A
• IEEE 802.3af PoE & 802.3at PoE+ (High Power) compliant
• 140 Watts Total Power Budget for PoE
• Up to 30 watts per port
• Auto Detection of Powered Device (PD) and Consumption Levels
• Per Port PoE Status LED Indicators
• Alert LED and Mail Alert for high PoE Usage
• Port Power Consumption Monitoring via Web Interface & CLI
• Circuit Protection to Prevent Power Interference between Ports
• PoE PD Monitoring & Maintenance Features (per port)
• Scheduling
• PoE PD Priority
• Restart PoE PD if not responding to ping
• Restart PoE IP Camera if not providing camera output

VLAN

• 802.1q Tag-based VLAN
• Port-based and MAC-based VLANs
• QinQ (Basic)
• GVRP – General VLAN Registration Protocol
• Up to 256 VLANs (out of 4096 VLAN IDs)
• 802.1v Protocol-Based VLAN
• Voice VLAN (OUI Mode)
• Surveillance VLAN (OUI Mode)
• Protocol VLAN
• MAC-based VLAN
• Management VLAN
• Port Isolation

QoS (Quality of Service)

• Support 8 priority queues
• Port-Based rate control (Ingress & Egress)
• Priority queue schedule (WRR or Strict Priority)
• Rate Limit
• Class of Service
• 802.1p CoS
• DSCP
• CoS-DSCP
• IP Precedence ToS

Network Security

• IP Source Guard with ARP inspection
• Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
• DoS Attack protection
• AAA Authentication
• MAC Authentication
• Protected Port / Port Isolation
• Static Port Security
• Dynamic ARP Inspection
• DHCP Snooping with Option 82
• Loop Detection & Prevention
• Access Control Lists (ACL)
• Up to 512 ACL Entries
• Source and destination MAC
• VLAN ID
• IPv4/v6 address
• Protocol
• TCP/UDP port

Spanning Tree

• Spanning Tree Protocol (STP)
• Rapid Spanning Tree Protocol (RSTP)
• Multiple Spanning Tree Protocol (MSTP)

Link Aggregation

• Combine multiple ports to increase bandwidth
• 8 Aggregation Groups
• Up to 8 ports in each group
• LACP or Static setup
• Supports traffic load balancing

Networking Performance

• Switching Capacity: 20Gbps
• Forwarding Rate: 14.88Mpps (64 bytes)
• Jumbo Frames up to 9KB
• Packet Buffer size: 4.1Mbit

Multicast

• Up to 256 multicast groups
• Multicast Group Filtering / Throttling
• IGMP Snooping V2/V3 (BISS)
• IGMP V2/V3 Querier
• Multicast VLAN registration
• MLD Snooping V1/V2
• -Immediate Leave
• -Report Suppression
• -IGMP/MLD Querier

AAA (Authentication, Authorisation, Accounting)

• RADIUS / TACACS+ Authentication for Management
• Multiple AAA Server
• MAC / Inaccessible Authentication bypass
• RADIUS Authentication 802.1X
• Accounting
• Guest VLAN
• Port based Authorisation
• 802.1X Single/Multi
• MAC-based
• Web-based
• Attribute Assignment
• User Privilege
• VLAN
• TACACS+ Authentication
• Port Authorisation
• Accounting

ONVIF Surveillance Management

• Discovery of ONVIF-compliant IP Cameras
• Surveillance Topology
• Real-Time Video Streaming
• ONVIF Device Maintenance
• Device Information
• Network Settings Configuration
• Time Settings
• Reboot
• Reset to Factory Default Settings
• Ping Check with Mail Alert on disconnection

Management

• Central Management
• VigorACS
• VigorConnect
• Vigor Router Switch Management (requires router firmware support)
• IPv4 & IPv6 Dual-Stack
• LLDP(802.1ab) + MED
• Web User Interface (HTTP or HTTPS)
• Firmware Upgrade/Backup by HTTP/HTTPS
• HTTP (Non-TLS) can be disabled for increased security
• Configuration Backup/Restore
• Factory Default
• System Reboot
• Command Line Interface (CLI) via SSH/Telnet
• Console Port (RJ45) for CLI management
• OpenVPN Client with Certificate-based auth
• SNMP v1, v2c, v3 (with Generic Traps)
• RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)
• SNTP (Simple Network Time Protocol)

Diagnostics

• Port Status & Usage display
• CPU/RAM Usage display
• MAC Address Table
• Device Check
• Syslog
• Mail Alert
• Port Status
• Port Speed Change
• System Restart
• Device Check
• IP Conflict
• ONVIF IP Camera Snapshot
• Port Mirroring
• Ping Diagnostics
• Port-based Cable Test

Layer 3 Networking Features

• Static Route
• VLAN Routing
• DHCP Server (from firmware 2.6.8)

IPv4 Features

• DHCP Client
• DNS Client
• DHCP Server (from firmware 2.6.8)
• Up to 8 subnets
• Option 82, 66, 67
• DHCP Snooping
• DHCP IP Source Guard

IPv6 Features

• Auto Configuration
• Static IPv6 Address & Prefix Length
• Static IPv6 Default Gateway
• IPv6 Neighbour Discovery (ND)
• IPv6 Duplicate Address Detection
• ICMPv6
• DHCPv6 Client

General IEEE Standards Compliance

• 802.3af PoE
• 802.3at PoE+
• 802.3 10Base-T
• 802.3u 100Base-T
• 802.3ab 1000Base-T
• 802.3x Flow Control
• 802.3 Auto-Negotiation
• 802.1q Tag-based VLAN
• 802.1p Class of Service
• 802.1d STP
• 802.1w RSTP
• 802.1s MSTP
• 802.3ad LACP
• 802.1ad QinQ
• 802.1x Port Access Control
• 802.1AB LLDP
• 802.3az EEE

Operating Requirements

• Power Input Requirements: 100-240VAC
• Power supply: Internal
• Maximum Input Power Consumption: 164.3 Watts
• Cooling: Passively cooled
• Operating Temperature: 0 °C to 50 °C
• Storage Temperature: -20 °C to 70 °C
• Operating Humidity: 5% to 90% RH (non-condensing)

Physical Specifications

• Dimensions: 319 x 208 x 44 mm (W x D x H)
• Rack mountable: 1U
• Weight: 2.61Kg (5lb)

Package Contents

• 1 x VigorSwitch P2100
• 1 x UK IEC13 Power Cable
• 1 x 1U Rack Mount Fittings
• 1 x Quick Start Guide

Standard Warranty: 2-Years