DrayTek VSP2280X-K VigorSwitch PoE+ Rackmount 24-Port Gigabit Switch
DrayTek VSP2280X-K VigorSwitch PoE+ Rackmount 24-Port Gigabit Switch
SKU:VSP2280X-K
Out of stock
DrayTek VSP2280X-K VigorSwitch PoE+ Rackmount 24-Port Gigabit Switch
DrayTek P2280x VigorSwitch is a 10-Gigabit, high-performance, fully managed Gigabit Ethernet switch with four (4) 10GbE SFP+ ports and twenty-four (24) 1GbE PoE+ that can be managed locally or centrally.
DrayTek P2280x VigorSwitch 24-Port L2+ Managed Rackmount Gigabit PoE+ Switch w/ 4 x 10G SFP+ Ports (400W)
DrayTek VSP2280X-K VigorSwitch PoE+ Rackmount 24-Port Gigabit Switch
The DrayTek P2280x VigorSwitch is a 10-Gigabit, high-performance, fully managed Gigabit Ethernet switch with four (4) 10GbE SFP+ ports and twenty-four (24) 1GbE PoE+ that can be managed locally or centrally.
Key Features
- Twenty-four (24) RJ-45 Gigabit Ethernet ports with PoE+.
- Four (4) SFP+ 10GbE ports for Uplink / Fibre.
- PoE (Power-over-Ethernet) for powering IP phones, wireless access points, IP cameras etc.
- Generous power budget (400W total).
- VLAN Routing & Static Route with DHCP server / relay.
- Virtual Router Redundancy Protocol.
- QoS for Application traffic prioritization.
- 802.1x RADIUS / TACACS+ Port Authentication with Accounting.
- Voice VLAN for QoS (OUI Mode).
- Access Control List (ACL).
- Port Mirroring & Link Aggregation.
- IGMP Snooping/Querier (up to 256 Multicast Groups).
- IPv4 and IPv6 Support.
- Hardware Monitor with smart fan control.
- Centrally managed or standalone operation.
Specifications
Physical Interfaces
- 24 x RJ-45 Ethernet Ports – 10/100/1000Mbps
- 4 x SFP+ Ports – 1000Mbps/10Gbps
- Console Port (RJ-45 physical, RS-232 electrical)
PoE Specification
- 24-ports 802.3af & 802.3at (High Power) PoE PSE
- 400 Watts Total Power Budget for PoE
- Up to 30 watts per port
- Auto Detection of Powered Device (PD) and Consumption Levels
- Per Port PoE Status LED Indicators
- Alert LED for high PoE Usage
- Port Power Consumption Monitoring via Web Interface & CLI
- PoE PD Monitoring & Maintenance Features (per port)
- Scheduling
- PoE PD Priority
- PoE PD Status / Ping monitoring - restart PoE PD port if no response
- Circuit Protection to Prevent Power Interference between Ports
VLAN
- 802.1q Tag-based VLAN
- Port-based and MAC-based VLANs
- QinQ (Basic)
- GVRP – General VLAN Registration Protocol
- Up to 255 VLANs (out of 4096 VLAN IDs)
- 802.1v Protocol-Based VLAN
- Voice VLAN (OUI Mode)
- Surveillance VLAN (OUI Mode)
- Protocol VLAN
- MAC-based VLAN
- Management VLAN
- Port Isolation
QoS
- Support 8 priority queues
- Port-Based rate control (Ingress & Egress)
- Priority queue schedule (WRR or Strict Priority)
- 802.1p CoS
- DSCP
- CoS-DSCP
- IP Precedence ToS
- Rate Limit
- Class of Service
Network Security
- Access Control Lists (ACL)
- Up to 512 ACL Entries
- Source and destination MAC
- VLAN ID
- IPv4/v6 address
- Protocol
- TCP/UDP port
- IP Source Guard with ARP inspection
- Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
- DoS Attack protection
- AAA Authentication
- MAC Authentication
- Protected Port / Port Isolation
- Static Port Security
- Dynamic ARP Inspection
- DHCP Snooping with Option 82
- Loop Detection & Prevention
Spanning Tree
- Spanning Tree Protocol
- Rapid Spanning Tree Protocol
- Multiple Spanning Tree Protocol
Link Aggregation
- Combine multiple ports to increase bandwidth
- 8 Aggregation Groups
- Up to 8 ports in each group
- LACP or Static setup
- Supports traffic load balancing
Networking Performance
- Switching Capacity: 128Gbps
- Forwarding Rate: 95.24Mpps
- MAC Addresses Supported: 16,000
- Jumbo Frames up to 12KB
- Packet Buffer size: 12Mbit
- Layer 3 Routing Table: Up to 1000 Entries
Multicast
- Up to 256 multicast groups
- Multicast Group Filtering / Throttling
- IGMP Snooping V2/V3 (BISS)
- IGMP V2/V3 Querier
- MLD Snooping V1/V2
- Immediate Leave
- Report Suppression
- IGMP/MLD Querier
- Multicast VLAN registration
AAA
- RADIUS / TACACS+ Authentication for Management
- Multiple AAA Server
- MAC / Inaccessible Authentication bypass
- RADIUS Authentication 802.1X
- Multiple AAA Server
- Accounting
- Guest VLAN
- Port based Authorisation
- 802.1X Single/Multi
- MAC-based
- Web-based
- Attribute Assignment
- User Privilege
- VLAN
- TACACS+ Authentication
- Port Authorisation
- Accounting
Management
- Virtual Stacking – Single IP Management
- OpenVPN Client
- ONVIF – IP Camera Management
- Running/Startup/Backup Configuration
- sFlow
- IPv4 & IPv6 Dual-Stack
- LLDP(802.1ab) + MED
- Web User Interface (HTTP or HTTPS)
- Firmware Upgrade/Backup by HTTP/HTTPS
- HTTP (Non-TLS) can be disabled for increased security
- Configuration Backup/Restore
- Factory Default
- System Reboot
- Dual Firmware Image (Active & Backup Firmware)
- Command Line Interface (CLI) via SSH/Telnet
- Console Port (RJ45) for CLI management
- DrayTek Switch Management support via router (requires router firmware support)
- VigorACS Compatible (TR-069)
- SNMP v1, v2c, v3 (with Generic Traps)
- RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)
- SNTP (Simple Network Time Protocol)
Diagnostics
- Port Status & Usage display
- PoE activity display
- CPU/RAM Usage display
- Event Log via Syslog or email
- Port Mirroring
- Ping Diagnostics
- Port-based Cable Test
Hardware Monitor
- Remote Monitoring through Web Interface & VigorACS
- Hardware Monitor Data Recording & Graphing
- Email & LED alert on Fan failure, voltage high/low and overheat
- Temperature Monitoring
- Voltage Monitoring
- Smart Fan Control for low noise operation
- Power Saving Mode
Layer 3 Networking Features
- Static Route
- VLAN Routing
- Virtual Router Redundancy (VRRP) Protocol
IPv4 Features
- DHCP Client
- DNS Client
- DHCP Server
- Option 82, 66, 67
- DHCP Relay
- DHCP Snooping
- DHCP IP Source Guard
IPv6 Features
- Auto Configuration
- Static IPv6 Address & Prefix Length
- Static IPv6 Default Gateway
- IPv6 Neighbour Discovery (ND)
- IPv6 Duplicate Address Detection
- ICMPv6
- DHCPv6 Client
General IEEE Standards Compliance
- 802.3 10Base-T
- 802.3u 100Base-T
- 802.3ab 1000Base-T
- 802.3ae 10GBase-T
- 802.3x Flow Control Capability
- 802.3 Auto-negotiation
- 802.3ad Port trunk with LACP
- 802.3az Energy Efficient Ethernet
- 802.3af PoE
- 802.3at PoE+
- 802.1q VLAN
- 802.1p Class of Service
- 802.1d Spanning Tree
- 802.1w Rapid Spanning Tree
- 802.1s Multiple Spanning Tree
- 802.1x Port Based Network Access Control
- 802.1ab Link Layer Discovery Protocol (LLDP)
- 802.1ad QinQ
Operating Requirements
- Power Input Requirements: 100-240VAC
- Power supply: Internal
- Maximum Input Power Consumption: 480 Watts
- Cooling: Dual Smart Fan
- Operating Temperature: 0 °C to 45 °C
- Storage Temperature: -20 °C to 70 °C
- Operating Humidity: 10% to 90% RH (non-condensing)
Physical Specifications
- Dimensions (W x D x H): 441 x 270 x 45 mm
- Rack mountable: 1U
- Weight: 4.32Kg (excluding SFP modules/cables)
Package Contents
- 1 x DrayTek P2280x
- 1 x Quick Start Guide
- 1 x Rack Mount Kit
- 1 x Console Cable
- 1 x Power Cord