Ubiquiti LOCOM2 WiFi 4 Access Point (N)
Ubiquiti LOCOM2 WiFi 4 Access Point (N)
SKU:LOCOM2
Out of stock
Ubiquiti LOCOM2 WiFi 4 Access Point (N)
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the original Ubiquiti Nano Station.
Ubiquiti LOCOM2 Nano Station M2 airMAX Outdoor 2.4 Ghz 8 dBi WiFi 4 Access Point (150 Mbps N)
Ubiquiti LOCOM2 WiFi 4 Access Point (N)
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the original Ubiquiti Nano Station.
Ubiquiti LOCOM2 WiFi 4 Access Point (N) takes the same concept to the future with sleek and elegant form factor, along with integrated airMAX (MIMO TDMA protocol) technology.
The low cost, high performance, and small form factor of this Ubiquiti Nano Station Loco M2 makes it extremely versatile and economical to deploy.
Ubiquiti LOCOM2 WiFi 4 Access Point (N) takes the same concept to the future with sleek and elegant form factor, along with integrated airMAX (MIMO TDMA protocol) technology.
The low cost, high performance, and small form factor of this Ubiquiti Nano Station Loco M2 makes it extremely versatile and economical to deploy.
Key Features
- AP mode, client or WDS with Traffic shaping and QoS.
- Between WAN and LAN routing and transparent bridge with or without NAT.
- Signal strength, which is reported by the onboard LED indicator.
- In bridge mode and WDS device supports transparent transmission IPv6.
Utilize airMAX Technology
Unlike standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This "time slot" method eliminates hidden node collisions and maximizes airtime efficiency. It provides many magnitudes of performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class.
- Intelligent QoS Priority is given to voice/video for seamless streaming.
- Scalability High capacity and scalability.
- Long Distance Capable of high-speed, carrier-class links.
- Latency Multiple features dramatically reduce noise.
Passive Power over Ethernet (PoE)
The Power over Ethernet (PoE) functionality allows both power and data to be carried over a single Ethernet cable to the Ubiquiti Nano Station LocoM2.
Specifications
Processor Specs
- Atheros MIPS 24 KC, 400 MHz
Memory
- 32 MB SDRAM, 8 MB Flash
Networking Interface
- (1) 10/100 Ethernet Port
Wireless Approvals
- FCC Part 15.247, IC RS210, CE
Operating Frequency Summary (MHz)
- 2412-2462
Antenna Gain
- 8.5 dBi
Antenna Cross-pol Isolation
- 20 dB Minimum
Antenna Max. VSWR
- 1.4:1
Antenna Beam width
- 60 degrees (H-pol) / 60 degrees (V-pol) / 60 degrees (Elevation)
Dimensions (mm)
- 163 x 31 x 80
Weight
- 0.18 kg
Power Supply (PoE)
- 24V, 0.5A
Max. Power Consumption
- 5.5 W
Gain
- 8 dBi
Polarization
- Dual Linear
Enclosure Characteristics
- Outdoor UV Stabilized Plastic
Mounting
- Pole Mounting Kit Included
Power Method
- Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Operating Temperature
- -30 to 75 C
Operating Humidity
- 5 to 95% Condensing
Shock and Vibration
- ETSI300-019-1.4