MikroTik RBCAPAC WiFi 5 Access Point (AC)
MikroTik RBCAPAC WiFi 5 Access Point (AC)
SKU:RBCAPAC
Out of stock
MikroTik RBCAPAC WiFi 5 Access Point (AC)
MikroTik RBCAPAC cAP Dual-Band WiFi 5 PoE+ Access Point is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings.
MikroTik RBCAPAC (cAP ac) WiFi 5 PoE+ Access Point (RouterOS Level 4, 1.2Gbps AC)
MikroTik RBCAPAC WiFi 5 Access Point (AC)
MikroTik RBCAPAC cAP Dual-Band WiFi 5 PoE+ Access Point is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings.
The concurrent dual band wireless radio supports dual chain 2 GHz and 5 GHz in 802.11ac and legacy standards, and will provide coverage in 360 degrees around it.
Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output (up to 57V) on the second port.
Key Features
- Two (2) 10/100/1000 Gigabit Ethernet PoE ports.
- Comes with two (2) enclosures, so you can choose which design you like best.
- 16MB of built in flash storage with 128MB RAM.
- 1266 Mbps WiFi 5 connection speed using a IPQ-4018 Chip.
- Run with MikroTik RouterOS alongside a Level 4 license.
- 802.3af/at 17-57V input and Passive PoE up to 57V output.
The cAP ac is a feature packed device with a sleek enclosure, that can become inconspicuous with the push of a button - the customisable mode button in the device centre will turn off all lights and sounds at it’s default configuration, but can be reconfigured to launch any RouterOS script. The device also comes bundled with two enclosures, so you can choose which design you like best.
The cAP ac is equipped with two Ethernet ports, allowing you to connect another device, to further extend your network. What’s more, the second Ethernet port supports passive PoE output (up to 57 V), so it can power a wide variety of RouterBOARDs and other devices, like IP cameras. In the following scenario, you can use a central hEX PoE device to power all your cAP ac units, and then have cAP lite units connected to provide even better coverage. The hEX PoE can even be used as a CAPsMAN server, so you can easily manage all your access points, and control all their settings in a single device.
Specifications
Architecture
- ARM 32bit
CPU
- IPQ-4018
CPU core count
- 4
CPU nominal frequency
- 716 MHz
Dimensions
- Round case: Ø136 mm, height: 30 mm;
- Square case: 145 mm x 145 mm x 30 mm
License level
- 4
Operating System
- RouterOS
Size of RAM
- 128 MB
Storage size
- 16 MB
Storage type
- FLASH
Tested ambient temperature
- -40 to 50° C
Powering
Max Power consumption
- 13W
PoE in
- 802.3af/at
PoE out
- Passive PoE up to 57V
PoE in input Voltage
- 17-57 V
Number of DC inputs
- 1 (PoE-IN)
Wireless
Wireless 2.4 GHz number of chains
- 2
Wireless 2.4 GHz standards
- 802.11b/g/n
Antenna gain dBi for 2.4 GHz
- 2
Wireless 2.4 GHz chip model
- IPQ-4018
Wireless 5 GHz number of chains
- 2
Wireless 5 GHz standards
- 802.11a/n/ac
Antenna gain dBi for 5 GHz
- 2.5
Wireless 5 GHz chip model
- IPQ-4018
Ethernet
10/100/1000 Ethernet ports
- 2
Wireless specifications
2.4 GHz
- 1MBit/s
- Transmit (dBm): 26
- Receive Sensitivity: -100
- 11MBit/s
- Transmit (dBm): 26
- Receive Sensitivity: -94
- 6MBit/s
- Transmit (dBm): 26
- Receive Sensitivity: -96
- 54MBit/s
- Transmit (dBm): 23
- Receive Sensitivity: -78
- MCS0
- Transmit (dBm): 26
- Receive Sensitivity: -96
- MCS7
- Transmit (dBm): 22
- Receive Sensitivity: -73
5 GHz
- 6MBit/s
- Transmit (dBm): 26
- Receive Sensitivity: -96
- 54MBit/s
- Transmit (dBm): 21
- Receive Sensitivity: -80
- MCS0
- Transmit (dBm): 26
- Receive Sensitivity: -96
- MCS7
- Transmit (dBm): 20
- Receive Sensitivity: -75
- MCS9
- Transmit (dBm): 18
- Receive Sensitivity: -70